Geometric Crystal Outline DTF Transfer

• Upload transparent PNG artwork when possible.
• Use final print size and 300 DPI for clean detail.
• We print submitted artwork as-is and do not redraw, recolor, or upscale low-resolution files.
• Gang sheets may arrive rolled instead of pre-cut.

• Start by preparing your garment by ensuring that it is clean, dry, and free of any debris or lint.
• Preheat your heat press to the appropriate temperature for the type of garment you are using.
• Position the DTF transfer onto the garment, image side up, and align it according to your desired placement.
• Place a protective cover sheet on top of the transfer, such as a Teflon sheet or heat press parchment paper.
• Close the heat press and apply the appropriate pressure and time according to the type of garment and transfer you are using.
• When the time is up, open the press and carefully remove the cover sheet.
• Inspect the transfer to make sure it has adhered properly. If needed, repress for a few seconds to ensure proper adhesion.
• Allow the transfer to cool for a few minutes before handling or wearing the garment.
• For a matte finish, repress with kraft paper for 10 seconds.

Orders are produced in Irving, TX. Local pickup is available when selected at checkout. Shipping speed depends on production queue, order size, and carrier service. If you need a rush order, contact us before ordering so we can confirm timing.

Custom transfers are printed from the artwork submitted. Please review file size, transparency, spelling, colors, and placement before checkout. If we make a production mistake, contact us with photos and your order number so we can make it right.